How to Use
Place your diffuser on a firm, flat, and level surface. Fully charge the device before first use. Charge the diffuser with a power adaptor socket or USB port. The diffuser can operate continuously when plugged in USB power.
Hold the body, rotate the top counter-clockwise to unlock the metal cover. Add water into the reservoir until it reaches the RED maximum water marker. Do not overfill. Add 1-2 drops of your favorite essential oil to the water reservoir. Replace the metal cover and rotate clockwise to secure, making sure the lock marks are aligned. Press the button to start the device.
Press once: Diffuse continuously until it runs out of water. Press twice: Diffuse for 30 minutes and then shut off. Press three times: Diffuse at 5 minutes on/5 minutes off intervals until it runs out of water. Press four times: Diffuse for 30 seconds on/30 seconds off intervals until it runs out of water.
Battery LED Indicator: - Charging (cool white light) - Full Battery (warm white light) - Low Battery (flashing warm white light)
Always disconnect the AC adaptor from the device and power off the device before cleaning. Hold the base and rotate counterclockwise to take off the outer cover. Pour the water out from the opposite side of the ventilation hole.
This diffuser measures approximately 2.75 inches in diameter. For best results when used on the road, please ensure the diffuser fits snugly into your cupholder. Any jostling or tipping of the diffuser may cause the water inside to activate the diffuser's safety sensor, causing it to shut off operations.
How To Clean
Use a clean cloth and neutral cleanser to wipe down the reservoir. Then rinse with clean water and wipe dry with a cloth. We recommend cleaning your diffuser twice a week when used regularly.