How to Use
Place your diffuser on a firm, flat, and level surface. Fully charge the device before first use. Charge the diffuser with the provided USB power cord.
Hold the body, rotate the top cover counter-clockwise to unlock. Carefully add water into the reservoir until it reaches the black maximum water marker. Do not overfill. Add 1-3 drops of your favorite essential oil to the water reservoir. Replace the top cover and rotate clockwise to secure. Slide the on/off button down below the mist output to start the device.
This diffuser will run continuously for ten minutes and then automatically shut off. Use the sliding on/off button to stop or start the diffuser.
Always ensure the diffuser is turned off and not connected to the USB cable before filling the water reservoir. Do not fill the diffuser past the red marker line to prevent excess water from interfering with the diffuser’s functions.
Be careful not to let any water get into the USB port. If water does get into the USB port, we recommend wiping the area dry and allowing the diffuser to sit for a few hours before use.
Before inserting the USB cable, ensure it is completely dry by wiping it with a clean, dry cloth. Remove the USB cable once the device is fully charged. Always keep the diffuser dry when not in use.
Reservoir Capacity: Approx. 5/6 FL. OZ. (25 mL)
Features: 10 Minutes Continuous Mist/ Light Feature/ USB Power Cord/Approx. 3 FT coverage